The HD-DA-2 provides extra measures to ensure optimum results when distributing HDMI to multiple destinations, letting the installer select which downstream device provides the EDID, or letting the HD-DA-2 determine the best common resolution and format that both devices can support. The switches provide a simple yet versatile means for selecting the audio input source, configuring EDID, and choosing which audio formats to allow.Įmbedded in every HDMI signal, EDID (Extended Display Identification Data) allows a display or audio processor to inform the upstream source about its format and resolution capabilities, enabling the source to configure itself to deliver an optimum signal to the downstream device. Eight-channel PCM and high-bitrate 7.1 formats can only be handled by HDMI, so naturally all the other inputs and outputs on the HD-DA-2 must be disabled in order to pass the highest quality formats.Ĭonfiguring the HD-DA-2 for each application requires just a quick setting of its DIP switches. If you'd like to distribute 5.1 surround sound via the SPDIF output, then the HDMI outputs will be limited to 5.1 as well and the analog output will be disabled entirely. For instance, if you are using the analog output, which only supports stereo 2-channel signals, then the HDMI and SPDIF outputs will be limited to 2-channel PCM. The surround sound format for all outputs is simply limited to the best common format supported by the selected input and outputs. The HDMI input can even accept the signal from a DVI digital video source, allowing separate DVI and SPDIF signals to be merged into one HDMI signal, perfect for integrating an older digital AV source or computer into a modern HDMI based system.Īll of the outputs on the HD-DA-2 can be used simultaneously to feed up to four separate devices. This allows any HDMI video signal to be merged with an alternate audio source, effectively letting you generate a new HDMI AV signal containing your choice of audio and video sources. The HD-DA-2 also provides SPDIF coaxial and optical digital audio inputs, either of which may be selected as the audio source in place of the incoming HDMI audio signal. The SPDIF output supports Dolby Digital® or DTS® 5.1 surround sound signals, while the analog output handles stereo 2-channel signals. In addition to its two HDMI outputs, the HD-DA-2 also includes a SPDIF coaxial digital audio output and a stereo analog audio output, allowing the audio signal to be extracted from the HDMI source and converted to feed a legacy audio device. It also handles high-bitrate 7.1 surround sound audio formats like Dolby® TrueHD, Dolby Atmos®, and DTS-HD®. Ideal for use with Blu-ray Disc® and multimedia computer sources, the HD-DA-2 supports high-definition video up to 1080p60 with Deep Color and 3D, as well as high-resolution computer signals up to 1920x1200. The HD-DA-2 from Crestron® provides a versatile HD AV signal problem solver with high-performance specs and set-and-forget simplicity.Īs an HDMI distribution amp, the HD-DA-2 lets you easily share one HDMI signal between two display devices, or split that signal to feed one display and a separate audio processor. Do you need to feed two video displays from one HDMI® source? Or, split an HDMI signal between a display and a surround sound processor? Need to break out the HDMI audio signal and convert it to SPDIF or analog? Or, merge separate digital audio and video sources into one HDMI stream? Not a problem-just use the HD-DA-2.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |